| Fifth wheel height | :1243 mm | Total axle capacity | :42000 kg |
| Total length | :9040 mm | King pin capacity | :18000 kg |
| Total Height | :3443 mm | Total capacity | :60000 kg |
| Body dimension | :7666x2324x1600 mm | Empty weight | :11000 kg +-%3 |
| Body volume | :28 m3 | CARRING CAPACITY | :49.000 kg |
| AXLES | ECE R13.11 regulation level applicable,3 units fixed axles, module structure style drum brake, each axle capacity is 14 tons,front axle lifting controlled. | ||
| TYRES + RIMS | 12+1 pieces,12 R 22,5 dimension tyres and suitable steel rim to the tyre according to directive ECE 92/23/EEC*2005/11 | ||
| CHASSIS | After cutted and bended of S355 steel,steels are assembled by gas welding and also chassis is reinforced and strong | ||
| BODY | Body according to directive 97/27/EC *2003/19/EC,welded with profiles from high strength steel has supported body Floor: 6 mm thickness Side walls : 4 mm thickness Front and rear wall :4 mm thickness | ||
| BRAKE SYSTEM SUSPENSION SYSTEM | ECE R13.11 regulation level applicable,roll stability support (RSS), 2S/2M sensor, EBS brake system,1st axle is with 30 service brake chamber,2nd and 3rd axle are with 30x30 emergency brake chambers, automatic brake adjuster,electromagnetic compatibility (EMC) according to directive ECE R10.03, leaf type spring and air suspension system | ||
| ELECTRICAL SYSTEM | 2x7 pin electrical socket according to ECE.R48.04 regulation,24 volt electric lighting,side light ,rear stop light ,plate lighting system,reverse lights,reflective tape according to directive 70/222/EEC,registered license plate place | ||
| LANDING GEAR | 24 tons capacity lifting capacity,double speed and controlled from one side landing gear | ||
| HYDRAULIC SYSTEM | 5 graded teleskopic cylinder at the standards St 52 BK+S DIN 2391,35/90 gear pump ,oil tank and 46 number oil,electiric control valve | ||
| KING PIN | Acording to ECE R55.01 reglation level 2" or 3 1/2" King-pin; | ||
| ACCESSORY | 1 unit of steel sheet metal toolbox, 35 lt water tank, fire extinguisher, reflectors,wheel chocks and chock,1 pcs axle disassembly key,rear bumper accarding to ECE R58 02 regulation level,mudflap according to directive 91/226/EEC*2010/19/EC,accorting to ECE R73.01 regulation level side protection equipment; | ||
| SURFACE PROTECTION | SA2 ½ quality after sandblasting,avarage 120 micron paiting according to requested RAL code | ||
